AN ELECTRICAL ENGINEERING ANALYSIS OF ENERGY-EFFICIENT LIGHTING AND CLIMATE CONTROL SYSTEMS FOR MODERN MOSQUES
Article Sidebar
-
Climate Control, Energy Efficiency, Lighting Systems.
Abstract
The increasing demand for energy-efficient solutions in public buildings has led to a growing interest in sustainable technologies for modern mosques. As places of worship with high foot traffic and long operating hours, mosques represent an ideal setting for implementing energy-efficient lighting and climate control systems. However, there is limited research on optimizing energy usage in these religious spaces while maintaining comfort and functionality. This study aims to analyze the energy efficiency of lighting and climate control systems in modern mosques and propose improvements that align with sustainable energy practices. Using an electrical engineering approach, this research employs simulation models and energy consumption data to evaluate current systems in selected mosques. Various energy-efficient technologies, including LED lighting, smart thermostats, and automated climate control systems, are assessed for their potential in reducing energy consumption. The results indicate that integrating energy-efficient lighting and climate control solutions can significantly reduce energy use, with potential savings of up to 40%. The study concludes that adopting these systems not only promotes sustainability but also aligns with the Islamic principles of conservation and stewardship of resources. Recommendations for mosque administrators include investing in smart energy solutions and regular monitoring to optimize energy consumption.
Full text article
References
Abdeen, A., Mushtaha, E., Hussien, A., Ghenai, C., Maksoud, A., & Belpoliti, V. (2024). Simulation-based multi-objective genetic optimization for promoting energy efficiency and thermal comfort in existing buildings of hot climate. Results in Engineering, 21, 101815. https://doi.org/https://doi.org/10.1016/j.rineng.2024.101815
Abu Qadourah, J. (2024). Energy efficiency evaluation of green roofs as a passive strategy in the mediterranean climate. Results in Engineering, 23, 102519. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102519
Ahmed, N. Y., Martínez, F. J. R., & Hernández, J. M. R. (2025). Climate-resilient zero energy buildings: Long-term modelling for energy efficiency and renewables impact. Results in Engineering, 27, 106545. https://doi.org/https://doi.org/10.1016/j.rineng.2025.106545
Al-Janabi, Y. I. H., Algburi, S., Al-Dulaimi, O., Fakhruldeen, H. F., Makhmudov, A., Khalaf, D. H., Hanoon, T. M., Jabbar, F. I., Al-Jiboory, A. K., Hassan, Q., & Kiconco, S. (2025). Advancing energy optimization in building systems through multi-scale sensitivity, adaptive modeling, and real-time management. Results in Engineering, 26, 104946. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104946
Al Naimat, A., & Liang, D. (2023). Substantial gains of renewable energy adoption and implementation in Maan, Jordan: A critical review. Results in Engineering, 19, 101367. https://doi.org/https://doi.org/10.1016/j.rineng.2023.101367
Algburi, S., Mohammed, A., Fakhruldeen, H. F., Abdullah, I., Alhani, I., Khudhair, A., Hassan, Q., Ssebunya, M., & Jabbar, F. I. (2025). Optimization of multi-energy storage in urban building clusters. Results in Engineering, 26, 105427. https://doi.org/https://doi.org/10.1016/j.rineng.2025.105427
Alhassan, M., Alkhawaldeh, A., Betoush, N., Sawalha, A., Amaireh, L., & Onaizi, A. (2024). Harmonizing smart technologies with building resilience and sustainable built environment systems. Results in Engineering, 22, 102158. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102158
Aljashaami, B. A., Alwan, N. T., Al-Attar, A. A., Lateef Tarish, A., Humada, A. M., Velkin, V. I., & Majeed, M. H. (2025). Implementing Sustainable Zero Energy Building Standards in Iraq Energy Efficiency Measures. Results in Engineering, 107567. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107567
Alrwashdeh, S. S. (2023). Energy profit evaluation of a photovoltaic system from a selected building in Jordan. Results in Engineering, 18, 101177. https://doi.org/https://doi.org/10.1016/j.rineng.2023.101177
Altarawneh, N. A., & Murtadha, T. K. (2023). Managing engineering challenges in the design and implementation of eco-friendly residential structures. Results in Engineering, 19, 101363. https://doi.org/https://doi.org/10.1016/j.rineng.2023.101363
Basantes, B., Ulloa-Herrera, F., Pozo, M., & Camacho, O. (2024). Power management of an off-grid photovoltaic system using a linear algebra based control. Results in Engineering, 23, 102375. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102375
Chelaru, B., Onu?u, C., Ungureanu, G., Volf, I., & ?erb?noiu, A. A. (2025). BIM and cloud-based tools integration for BREEAM in energy-efficient building design: A case study. Results in Engineering, 26, 105493. https://doi.org/https://doi.org/10.1016/j.rineng.2025.105493
Delarami, A., Mohammadbeigi, A., & Gharib, M. R. (2024). The influence of the climate, the materials of the walls, and the gas effects of double and triple-glazed windows in terms of energy evaluation and economic expenses. Results in Engineering, 23, 102793. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102793
Dezfouli, M. M. S., Dehghani-Sanij, A. R., Kadir, K., Suhairi, R., Rostami, S., & Sopian, K. (2023). Is a fan coil unit (FCU) an efficient cooling system for net-zero energy buildings (NZEBs) in tropical regions? An experimental study on thermal comfort and energy performance of an FCU. Results in Engineering, 20, 101524. https://doi.org/https://doi.org/10.1016/j.rineng.2023.101524
El-Kanj, H. G., Alomari, M. M., & Alshdaifat, N. I. (2025). A Renewable Smart IoT-Based Water Desalination System: A Kuwaiti Case Study. Results in Engineering, 107693. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107693
El Barkouki, B., Laamim, M., Ouassaid, M., Mahir, O., & Rochd, A. (2025). Real-time supervisory control strategy for a grid-connected microgrid using hardware-in-the-loop simulation. Computers and Electrical Engineering, 124, 110419. https://doi.org/https://doi.org/10.1016/j.compeleceng.2025.110419
Et-taibi, B., Abid, M. R., Boufounas, E.-M., Morchid, A., Bourhnane, S., Abu Hamed, T., & Benhaddou, D. (2024). Enhancing water management in smart agriculture: A cloud and IoT-Based smart irrigation system. Results in Engineering, 22, 102283. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102283
Fattah, T. R., Jalal, S. J., Katona, T. J., & Baranyai, B. (2024). Bio-curvilinear shading device for cooling load reduction in office buildings assessed by a novel energy simulation framework. Results in Engineering, 23, 102493. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102493
Forrousso, S., Idrissi Kaitouni, S., Mana, A., Wakil, M., Jamil, A., Brigui, J., & Azzouzi, H. (2024). Optimal sizing of off-grid microgrid building-integrated-photovoltaic system with battery for a net zero energy residential building in different climates of Morocco. Results in Engineering, 22, 102288. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102288
Ghasaban, M., Mirjalili, P., & Yeganeh, M. (2025). Integration of building envelope with open spaces and greenery to enhance thermal and visual comfort and energy efficiency in office buildings. Results in Engineering, 25, 103660. https://doi.org/https://doi.org/10.1016/j.rineng.2024.103660
Gigasari, A. R., Cañada-Soriano, M., Aparicio-Fernández, C., & Vivancos, J.-L. (2025). Impact of Window-to-Wall Ratio (WWR) and shading on energy demand in a residential building across five distinct climates. Results in Engineering, 107518. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107518
Hajimirza Amin, N., Etemad, A., & Abdalisousan, A. (2024). Data-driven performance analysis of an active chilled beam air conditioning system: A machine learning approach for energy efficiency and predictive maintenance. Results in Engineering, 23, 102747. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102747
Hasan, S., Islam Meem, A., Saiful Islam, M., Sabrina Proma, S., & Kumar Mitra, S. (2024). Comparative techno-economic analyses and optimization of standalone and grid-tied renewable energy systems for South Asia and Sub-Saharan Africa. Results in Engineering, 21, 101964. https://doi.org/https://doi.org/10.1016/j.rineng.2024.101964
Hauashdh, A., Nagapan, S., Jailani, J., & Gamil, Y. (2024). An integrated framework for sustainable and efficient building maintenance operations aligning with climate change, SDGs, and emerging technology. Results in Engineering, 21, 101822. https://doi.org/https://doi.org/10.1016/j.rineng.2024.101822
Hooshmand, A. H. (2025). Smart modular greenhouse control via IoT, LabVIEW, and PSO-PID integration. Computers and Electrical Engineering, 128, 110713. https://doi.org/https://doi.org/10.1016/j.compeleceng.2025.110713
Hossain, M. I., Anonto, H. Z., Rohan, A. I., Shufian, A., & Ghosh, D. K. (2025). Optimizing power distribution and stability in islanded microgrids with wind energy integration using enhanced droop and virtual impedance control. Results in Engineering, 27, 106970. https://doi.org/https://doi.org/10.1016/j.rineng.2025.106970
Idrissi Kaitouni, S., Gargab, F.-Z., Tabit, A., Mabrouki, M., Lamdouar, N., Jamil, A., & Ahachad, M. (2024). A life cycle carbon dioxide equivalent emissions assessment of zero carbon building in hot semi-arid climate region: Case study. Results in Engineering, 23, 102589. https://doi.org/https://doi.org/10.1016/j.rineng.2024.102589
Issa, H. A., Abdali, L. M., Alhusseini, H., & Velkin, V. I. (2025). Design, modeling, and control of a dual-axis solar tracker using fractional order PID controllers for enhanced energy efficiency. Results in Engineering, 27, 106073. https://doi.org/https://doi.org/10.1016/j.rineng.2025.106073
Karbasforoushha, M. A., Khajehzadeh, M., Keawsawasvong, S., Prasittisopin, L., & Jearsiripongkul, T. (2025). Building Energy Optimization Using an Improved Exponential Distribution Optimizer Based on Golden Sine Strategy Minimizing Energy Consumption Under Uncertainty. Results in Engineering, 26, 104840. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104840
Kumar, P. H., Alluraiah, N. C., Gopi, P., Bajaj, M., P, S. K., Kalyan, C. H. N. S., & Blazek, V. (2025). Techno-economic optimization and sensitivity analysis of off-grid hybrid renewable energy systems: A case study for sustainable energy solutions in rural India. Results in Engineering, 25, 103674. https://doi.org/https://doi.org/10.1016/j.rineng.2024.103674
Li, J. (2025). Green building design and energy efficiency improvement in architectural engineering. Results in Engineering, 27, 106973. https://doi.org/https://doi.org/10.1016/j.rineng.2025.106973
Mamodiya, U., & Tiwari, N. (2023). Dual-axis solar tracking system with different control strategies for improved energy efficiency. Computers and Electrical Engineering, 111, 108920. https://doi.org/https://doi.org/10.1016/j.compeleceng.2023.108920
Omirgaliyev, R., Khamzina, A., Yedilkhan, D., Friedrich, D., & Zhakiyev, N. (2025). An advanced data analysis method using heating degree-days for estimating the efficiency of buildings in smart cities: A case study of Astana. Results in Engineering, 28, 107502. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107502
Rajaram, P., & O?V?, G. S. (2025). Data-driven predictive models for sustainable smart buildings. Results in Engineering, 27, 105916. https://doi.org/https://doi.org/10.1016/j.rineng.2025.105916
Roy, S., & Chakraborty, R. S. (2025). Low-cost smart irrigation solution for efficient water use and requirement prediction. Computers and Electrical Engineering, 125, 110420. https://doi.org/https://doi.org/10.1016/j.compeleceng.2025.110420
Sajid, I., Sarwar, A., Tariq, M., Bakhsh, F. I., Ahmad, S., & Mohamed, A. S. N. (2025). An efficient tangent search based power harnessing algorithm for photovoltaic energy generation system. Computers and Electrical Engineering, 123, 110118. https://doi.org/https://doi.org/10.1016/j.compeleceng.2025.110118
Saleem, M. S., & Abas, N. (2025). Optimization and loss estimation in energy-deficient polygeneration systems: A case study of Pakistan’s utilities with integrated renewable energy. Results in Engineering, 25, 104001. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104001
Samal, P., Nayak, N., Satapathy, A., & Bhuyan, S. K. (2025). Load frequency control in renewable based micro grid with Deep Neural Network based controller. Results in Engineering, 25, 103554. https://doi.org/https://doi.org/10.1016/j.rineng.2024.103554
Sermsuk, M., Sukjai, Y., Rajoo, S., Kiatkittipong, K., Wiboonrat, M., & Siripongdee, S. (2025). Feasibility of integrating small-scale liquefied natural gas (LNG) terminal with combined cycle power plant to reduce carbon emissions and costs for data centers. Results in Engineering, 26, 105612. https://doi.org/https://doi.org/10.1016/j.rineng.2025.105612
Shahpar, M., Hajinezhad, A., Fattahi, R., & Moosavian, S. F. (2025). Efficient refrigerant strategies for large-scale geothermal heat pumps: Triple analysis of energy, exergy, and cost. Results in Engineering, 25, 104052. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104052
Shen, H. (2024). Planning of renewable energy regional heating system based on demand side uncertainty. Results in Engineering, 22, 101997. https://doi.org/https://doi.org/10.1016/j.rineng.2024.101997
Tian, Y., Zhao, Z., & Loo, J. Y. (2025). An application of smart visual air conditioning controller to enhance control efficiency in office environments. Results in Engineering, 25, 104045. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104045
Wang, A., Yu, S., Shi, C., & An, Y. (2025). Optimization of university dormitory renovation in severe cold regions under the impact of climate change. Results in Engineering, 26, 105384. https://doi.org/https://doi.org/10.1016/j.rineng.2025.105384
Yakubu, S., Samikannu, R., Yahya, A., Badruddin, I. A., Kamangar, S., Kadarmydeen, M. B., Kwarteng, M., Ladu, N. S. D., & Wetajega, S. D. (2025). Feasibility design, comparative evaluation, and energy consumption prediction of standalone hybrid energy system for rural electrification in Ghana using machine learning models. Results in Engineering, 25, 104269. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104269
Yang, X., Zeng, C., Yao, Y., Luo, J., & Liu, Z. (2025). Trade-off Analysis Framework for PV-Battery Systems in Multi-Functional Building Complexes: A Techno-Economic Assessment with Real-World Airport Application. Results in Engineering, 107665. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107665
Younis, R. A., Touti, E., Aoudia, M., Zahrouni, W., Omar, A. I., & Elmetwaly, A. H. (2024). Innovative hybrid energy storage systems with sustainable integration of green hydrogen and energy management solutions for standalone PV microgrids based on reduced fractional gradient descent algorithm. Results in Engineering, 24, 103229. https://doi.org/https://doi.org/10.1016/j.rineng.2024.103229
Yussuf, R. O., Asfour, O. S., Fattah, A. A. El, & Asif, M. (2025). A mixed-method comparative analysis of sustainable roofing solutions for thermal and energy efficiency in residential buildings in Saudi Arabia. Results in Engineering, 28, 107159. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107159
Zhen, X., Li, S., Peng, J., Zhao, Z., Zhang, X., Tan, C., Jiao, R., & Wu, W. (2025). Analysis of building envelope for energy consumption and indoor comfort in a near-zero-energy building in Northwest China. Results in Engineering, 25, 104243. https://doi.org/https://doi.org/10.1016/j.rineng.2025.104243
Authors
Copyright (c) 2025 Sulaiman Sulaiman
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
