FLUID-STRUCTURE INTERACTION ANALYSIS OF ENERGY-SAVING DEVICES (ESDS) FOR ENHANCING PROPULSIVE EFFICIENCY IN LARGE COMMERCIAL VESSELS
Indonesia 
Abstract
Large commercial vessels require substantial propulsion power, while conventional rigid-body analyses may overestimate the effectiveness of energy-saving devices by neglecting structural deformation under unsteady hydrodynamic loading. This study aimed to evaluate the coupled hydrodynamic and structural performance of selected energy-saving devices and determine their contribution to propulsive-efficiency improvement. A computational–experimental multiphysics approach integrated computational fluid dynamics, finite-element analysis, one-way and two-way fluid–structure interaction, modal and fatigue assessment, model-scale validation, off-design testing, and multi-objective optimization. Results showed that the selected hybrid device improved wake uniformity, weakened residual rotational flow, reduced hull-pressure fluctuations, and lowered delivered power by 7.31% at the design condition. Rigid CFD predicted an 8.20% reduction, indicating that structural flexibility caused a measurable loss of hydrodynamic benefit. Maximum deformation reached 18.6 mm, while local reinforcement reduced stress concentration and extended the estimated fatigue life from 11.8 to 22.6 years. Performance declined under slow-steaming, high-speed, and ballast conditions because of wake mismatch, increased appendage resistance, and greater deformation. The study concludes that reliable ESD design requires two-way hydroelastic assessment integrating efficiency, structural safety, vibration, fatigue resistance, and operational robustness across realistic vessel conditions. This integrated framework supports more accurate retrofit decisions and more credible fuel-saving projections for commercial shipping operations.
Full text article
References
Anevlavi, D., & Belibassakis, K. (2025). Hydroelastic Analysis of Passively Controlled Flexible Foil-Thrusters. In K. J. Spyrou & N. Themelis (Eds.), Innovations in Sustainable Maritime Technology—IMAM 2025 (pp. 427–438). Springer Nature Switzerland. https://doi.org/10.1007/978-3-032-01432-0_33
Anevlavi, D., Filippas, E., Karperaki, A., & Belibassakis, K. (2024). Hydroelastic analysis of flapping-foil thrusters using a partitioned BEM-FEM. Journal of Physics: Conference Series, 2647(5), 052001. https://doi.org/10.1088/1742-6596/2647/5/052001
Cai, B., Yang, Q., Lou, J., Ye, J., Chai, K., Chai, W., Qin, J., & Tang, J. (2026). Numerical Study of KVLCC2 Self-Propulsion with Conventional and Ducted Propellers in Shallow Water. Journal of Marine Science and Engineering, 14(10), 905. https://doi.org/10.3390/jmse14100905
Chen, S., Li, R., Li, A., Fan, D., & Lu, Z. (2026). Enhancing flapping foil propulsion through adaptive stiffness scheduling via deep reinforcement learning. AIP Advances, 16(4), 045039. https://doi.org/10.1063/5.0317819
Dibos, S., Pesch, T., & Benigni, A. (2024). HeatNetSim: An open-source simulation tool for heating and cooling networks suitable for future energy systems. Energy, 312, 133588. https://doi.org/10.1016/j.energy.2024.133588
Dong, Y., Song, B., Yang, W., & Xue, D. (2024). Enhancing Flapping Wing Propulsion in Forward Flight Through Dynamic Twisting: A Numerical Investigation. In S. Fu (Ed.), 2023 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2023) Proceedings (Vol. 1050, pp. 422–439). Springer Nature Singapore. https://doi.org/10.1007/978-981-97-3998-1_37
Duan, Y., Yin, B., Sun, W., & Liew, K. M. (2024). Nonlinear hydroelastic vibration of foamed concrete beams via peridynamic differential operator. Journal of Sound and Vibration, 592, 118642. https://doi.org/10.1016/j.jsv.2024.118642
El-Salamony, M. (2024). Effect of Symmetric Delay on Airfoil Plunging. Journal of Bionic Engineering, 21(6), 2864–2876. https://doi.org/10.1007/s42235-024-00604-5
Fang, H., Zhou, Z., & Wang, K. (2026). Parametric modeling and dynamic characteristic analysis of distributed propulsion wing structures. Aerospace Science and Technology, 178, 113100. https://doi.org/10.1016/j.ast.2026.113100
Gao, X., Zhang, J., & Wang, G. (2025). Enhancing intelligent bait boat performance: Axiomatic design and Extenics-driven optimization of ducted propellers in aquaculture applications. Aquaculture International, 33(5), 338. https://doi.org/10.1007/s10499-025-02014-8
Hosseini Naeimi, M., Nowruzi, H., & Tavakoli, S. (2026). Comparative CFD analysis of the hydrodynamic performance of a ship propulsion system using pre-swirl ducts. Ocean Engineering, 363, 126636. https://doi.org/10.1016/j.oceaneng.2026.126636
Hu, M., Wang, X., Zhang, G., Lu, D., Zhang, Y., Liu, J., Ya, T., Zheng, Q., & Wang, X. (2026). Molecular ecological networks reveal intensified competition of anammox consortia under quinoline pressure. Journal of Environmental Sciences, 162, 395–404. https://doi.org/10.1016/j.jes.2025.06.003
Huang, X., Lu, L., Whidborne, J., & Pavel, M. (2026). A bio-inspired hybrid flapping wing rotor for high-efficiency micro rotorcraft. CEAS Aeronautical Journal. https://doi.org/10.1007/s13272-026-00973-z
Kang, Y., Zhang, H., Liu, J., Chen, Y., Lu, Y., Ding, J., & Xu, D. (2026). High-efficiency wave-propulsion of a hydrofoil with bistable restoring stiffness. Journal of Ocean Engineering and Science, S2468013326001245. https://doi.org/10.1016/j.joes.2026.07.012
Lee, M.-K., & Lee, I. (2025). A machine-learning based prediction of wake distribution for feeder-class container ships with flow control fins. Ocean Engineering, 340, 122372. https://doi.org/10.1016/j.oceaneng.2025.122372
Liu, Y., Shi, J., Zhang, L., & Xie, F. (2024). Influence of Materials on the Transportation Performance of a Self-running Actuator Based on Ultrasonic Levitation. 2024 IEEE International Conference on Mechatronics and Automation (ICMA), 889–893. https://doi.org/10.1109/ICMA61710.2024.10632908
Lu, J., Lu, Y., Wang, C., Shao, M., & Khoo, B. C. (2025). Effects of different cross-flow fans on the hovering aerodynamic characteristics of a propulsive wing. Energy, 322, 135559. https://doi.org/10.1016/j.energy.2025.135559
Ma, Y., Wang, C., Han, Z., & Wang, Y. (2025). Mid-fidelity aero-propulsive coupling approach for distributed propulsion aircraft. Aerospace Science and Technology, 157, 109859. https://doi.org/10.1016/j.ast.2024.109859
Nabawi, R. A., Syahri, B., Alfana, Y. D., & Fernandez, D. (2026). Hydrodynamic optimization of a Sweptback Stern Foil for resistance reduction in flat-hull ships: A CFD-based extension of the Hull Vane concept. Teknomekanik, 9(1), 110–120. https://doi.org/10.24036/teknomekanik.v9i1.54872
Nguyen, K., Potnis, A., Saha, A., & Friend, J. (2025, January 6). Enhancing Breakup of Liquid Sheets in Quiescent Air Using MHz-Order Acoustic Waves. AIAA SCITECH 2025 Forum. AIAA SCITECH 2025 Forum. https://doi.org/10.2514/6.2025-2164
Numerical Investigation of Swirl Recovery from a Transonic Propeller with Swirl Recovery Vanes. (2025). Journal of Applied Fluid Mechanics, 18(4). https://doi.org/10.47176/jafm.18.6.3136
Oh, H., Li, W., & Ladeinde, F. (2025, January 6). Impact of Multiple Detonation Waves on Heat Flux in Rotating Detonation Engines. AIAA SCITECH 2025 Forum. AIAA SCITECH 2025 Forum. https://doi.org/10.2514/6.2025-2316
Riegler, C., Mutter, J., & Kayal, H. (2025). Comparison of autorotation and propulsive landing for planetary exploration. Acta Astronautica, 234, 26–40. https://doi.org/10.1016/j.actaastro.2025.04.008
Shan, X., & Bilgen, O. (2025). Multi-physics finite state fully coupled modeling of mechanism-free induced-strain actuated ornithopters. Aerospace Science and Technology, 166, 110573. https://doi.org/10.1016/j.ast.2025.110573
Shi, W., Tadros, M., Gomez, D., Nurnberg, M., Friedhoff, B., Felli, M., Eslamdoost, A., Aubert, A., & Flori, A. (2025). Development of Energy Efficient Solutions for Hydrogen Powered Vessels: RESHIP Project. In C. McNally, P. Carroll, B. Martinez-Pastor, B. Ghosh, M. Efthymiou, & N. Valantasis-Kanellos (Eds.), Transport Transitions: Advancing Sustainable and Inclusive Mobility (pp. 420–425). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-89444-2_61
Suman, P., Prasad, B. R., Prusty, G., Babu, Ch. M., & Khan, I. (2026). IoT-Enhanced Statistical Methods for Process Optimization in Biotechnology and Pharmaceutical Manufacturing. In K. C. Rath & K. Muduli, AIoT-Driven Sustainable Manufacturing and Operational Initiatives (1st ed., pp. 76–94). CRC Press. https://doi.org/10.1201/9781003503323-5
Sun, X., Wang, C., Wang, S., Tian, X., Li, J., & Wang, J. (2025). Fluid-Structure Interaction and Modal Analysis of Hydraulic Turbines. Journal of Physics: Conference Series, 3150(1), 012047. https://doi.org/10.1088/1742-6596/3150/1/012047
Sun, Y., Ge, S., Wu, R., Chen, W., Han, H., Ma, D., & Ping, H. (2026). Numerical prediction on cavitation characteristics of a marine propeller in oblique flow without and with hull wake effects. Ocean Engineering, 352, 124567. https://doi.org/10.1016/j.oceaneng.2026.124567
Tao, H., Shi, G., Zuo, Z., Chen, J., Li, J., & Chen, H. (2026). Study of unsteady aerodynamic loads and structural response of axial flow compressor in compressed air energy storage system. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 48(1), 2699335. https://doi.org/10.1080/15567036.2026.2699335
Wang, M., Li, X., & Zhang, S. (2026). A Cascaded trim method of electric aircraft subject to propulsive constraints in wing-borne flight. Aerospace Science and Technology, 171, 111589. https://doi.org/10.1016/j.ast.2025.111589
Wang, X., Zhou, C., Wang, J., Fan, J., Yin, Z., Zhu, C., & Deng, L. (2024). CMBUV: A Composite-Mechanism Bioinspired Underwater Vehicle Integrated With Elasticity and Shear Damping Possesses High-Performance Capability. IEEE Transactions on Intelligent Vehicles, 9(1), 1628–1640. https://doi.org/10.1109/TIV.2023.3286820
Wang, X., Zhou, C., Wang, J., Yin, Z., Shuai, P., & Song, S. (2026). Online Magnetorheological Damping Modulation of a Robotic Tuna for Enhanced Speed and Efficiency. IEEE/ASME Transactions on Mechatronics, 1–11. https://doi.org/10.1109/TMECH.2026.3659892
Wei, J., Gao, W., Lu, B., & Li, Q. (2026). Aero-Propulsive-Elastic Coupled Modeling of Distributed Electric Propulsion Systems with Slipstream Interactions. Aerospace, 13(7), 613. https://doi.org/10.3390/aerospace13070613
Yan, C., & Zhang, B. (2026). Initiation and Propulsive Performance of Bump-Induced Oblique Detonation Waves. AIAA Journal, 64(7), 3974–3989. https://doi.org/10.2514/1.J066322
Ye, L., Liu, H., Ding, Q., Hu, Z., Li, W., Cui, W., & Fan, D. (2026). Deep-Sea Biomimetic Manta Ray Robots: A Comprehensive Review Based on Operational Depth Spectrum, Structures, Energy Optimization, and Control Systems. Biomimetics, 11(3), 216. https://doi.org/10.3390/biomimetics11030216
Zeng, H., Fang, T., Xin, J., Jin, Q., Duan, Y., & Wan, L. (2026). Hydrodynamic performance and wake pattern in self-propelled side-by-side fish: Effects of phase difference and lateral spacing. Ocean Engineering, 353, 124830. https://doi.org/10.1016/j.oceaneng.2026.124830
Zhang, T., Liang, Z., Zheng, H., Chen, Z., Zheng, K., Xu, R., Liu, J., Zhu, H., Guan, Y., Xu, K., & Ding, X. (2025). Mole-inspired Forepaw Design and Optimization Based on Resistive Force Theory. Journal of Bionic Engineering, 22(1), 171–180. https://doi.org/10.1007/s42235-024-00633-0
Zhang, X., Gan, Z., Zhang, L., Liu, Z., Liu, S., Chen, Q., Shang, Z., & Duan, Z. (2026). Thrust Performance and Propulsive Efficiency of Bioinspired Piston-Type Synthetic Jet Underwater Propellers. Journal of Bionic Engineering, 23(5), 2853–2866. https://doi.org/10.1007/s42235-026-00939-1
Zhou, R., & Lin, S. (2026). Design of a distributed negative-pressure adsorption robot for energy-efficient closed-loop cleaning based on FSI and multi-physics optimization. Mechanics & Industry, 27, 6. https://doi.org/10.1051/meca/2026003
Zhu, H., Lin, L., Yu, C., Chen, Y., Xiong, H., Xing, Y., & Zheng, G. (2024). The Design and Application of a Vectored Thruster for a Negative Lift-Shaped AUV. Actuators, 13(6), 228. https://doi.org/10.3390/act13060228
Authors
Copyright (c) 2026 Ardiansyah Ardiansyah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
