TOWARDS INDUSTRY 5.0: A HUMAN-CENTRIC CYBER-PHYSICAL PRODUCTION SYSTEM FOR INDONESIA’S BATIK SMES
Article Sidebar
-
Batik SMEs, Cyber-Physical Systems, Human-Centric Production
Abstract
Industry 4.0 has revolutionized manufacturing through automation and data exchange, but the transition towards Industry 5.0 emphasizes human-centric approaches, integrating human expertise with advanced technologies like cyber-physical systems (CPS). In Indonesia, Small and Medium Enterprises (SMEs), particularly in traditional sectors such as batik production, face challenges in adapting to these technological advancements. The batik industry, while rich in cultural heritage, has yet to fully embrace automation or digitalization, resulting in inefficiencies and limited scalability. This study aims to explore the potential of Industry 5.0 by developing a Human-Centric Cyber-Physical Production System (HCPPS) tailored to Indonesia’s batik SMEs. The goal is to enhance production efficiency while preserving traditional craftsmanship through the integration of smart technologies. The research employed a mixed-methods approach, combining qualitative interviews with batik producers and quantitative analysis using data from pilot implementations of a CPS model. A prototype of a human-centric cyber-physical system was developed, integrating Internet of Things (IoT) devices, augmented reality (AR), and robotics to assist batik artisans. The implementation of the HCPPS prototype resulted in a 25% increase in production efficiency, while artisans reported higher job satisfaction due to enhanced skill integration with technology. The system enabled greater customization, faster production cycles, and reduced errors. The study demonstrates that Industry 5.0’s human-centric approach can significantly improve productivity in traditional sectors like batik, providing a path for Indonesian SMEs to modernize while maintaining their cultural identity.
Full text article
References
Alves, J., Sousa, P., Cruz, T., & Mendes, J. (2025). A review of architecture features for distributed and resilient industrial cyber–physical systems. Journal of Manufacturing Systems, 82, 1069–1090. https://doi.org/10.1016/j.jmsy.2025.07.012
Amaral, R., Castro, H., Pereira, F., Bastos, J., & Ávila, P. (2025). Development of a Learning Factory for Industry 5.0 Based on Open Design. CENTERIS - International Conference on ENTERprise Information Systems / ProjMAN - International Conference on Project MANagement / HCist - International Conference on Health and Social Care Information Systems and Technologies, 256, 681–684. https://doi.org/10.1016/j.procs.2025.02.167
Antomarioni, S., Fani, V., Bandinelli, R., Ciarapica, F. E., & Bevilacqua, M. (2025). Toward Quality 5.0: Integrating Industry 4.0, Human-centricity, and Quality Management. 11th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2025, 59(10), 1414–1419. https://doi.org/10.1016/j.ifacol.2025.09.238
Aruväli, T., Rauch, E., Matt, D. T., & Francalanza, E. (2025). SMEs’ Requirements for Resilient Cyber-Physical Production System. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 1611–1620. https://doi.org/10.1016/j.procs.2025.01.223
Atay, S., Müftüo?lu, C. T., Gülmez, N., & ?ahin, M. (2025). Society 5.0 and human-centered technology: Redefining talent management in the digital age. Sustainable Futures, 9, 100733. https://doi.org/10.1016/j.sftr.2025.100733
Barrero-Arciniegas, H. A., Bataleblu, A. A., Don, D., Rauch, E., & Matt, D. T. (2025). A Complexity-Based Framework to Design Resilient Cyber-Physical Production Systems. 35th CIRP Design 2025, 136, 99–104. https://doi.org/10.1016/j.procir.2025.08.019
Bécue, A., Gama, J., & Quelhas-Brito, P. (2025). Effect of AI on innovation capacity in the context of Industry 5.0: Findings from a qualitative study. Strategic Business Research, 1(1), 100006. https://doi.org/10.1016/j.sbr.2025.100006
Bittencourt, V., Kolla, S., Saakes, D., & Thiede, S. (2025). Towards Adaptive Human-Centered Workplaces – Framework & Building Blocks. 58th CIRP Conference on Manufacturing Systems 2025, 134, 813–818. https://doi.org/10.1016/j.procir.2025.03.068
Bolis, I., Marques, J. N., Cagno, E., & Morioka, S. N. (2025). Digital technologies, sustainability, and work: How can these themes be brought together to promote a human-centered future in Industry 5.0 implementation? Applied Ergonomics, 125, 104475. https://doi.org/10.1016/j.apergo.2025.104475
Bongomin, O., Mwape, M. C., Mpofu, N. S., Bahunde, B. K., Kidega, R., Mpungu, I. L., Tumusiime, G., Owino, C. A., Goussongtogue, Y. M., Yemane, A., Kyokunzire, P., Malanda, C., Komakech, J., Tigalana, D., Gumisiriza, O., & Ngulube, G. (2025). Digital twin technology advancing Industry 4.0 and Industry 5.0 across sectors. Results in Engineering, 26, 105583. https://doi.org/10.1016/j.rineng.2025.105583
Brückner, A., Wölke, M., Hein-Pensel, F., Schero, E., Winkler, H., & Jabs, I. (2025). Assessing Industry 5.0 readiness—Prototype of a holistic digital index to evaluate sustainability, resilience and human-centered factors. International Journal of Information Management Data Insights, 5(1), 100329. https://doi.org/10.1016/j.jjimei.2025.100329
Callari, T. C., Curzi, Y., & Lohse, N. (2025). Realising human-robot collaboration in manufacturing? A journey towards Industry 5.0 amid organisational paradoxical tensions. Technological Forecasting and Social Change, 219, 124249. https://doi.org/10.1016/j.techfore.2025.124249
Chen, J., Zhang, Z., Wang, L., Tang, D., Cai, Q., & Chen, K. (2025). Self-adaptive production scheduling for discrete manufacturing workshop using multi-agent cyber physical system. Engineering Applications of Artificial Intelligence, 150, 110638. https://doi.org/10.1016/j.engappai.2025.110638
Chrifi-Alaoui, C., Bouhaddou, I., Benabdellah, A. C., & Zekhnini, K. (2025). Industry 5.0 for Sustainable Supply Chains: A Fuzzy AHP Approach for Evaluating the adoption Barriers. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 2645–2654. https://doi.org/10.1016/j.procs.2025.01.324
Ciampi, F. G., Diallo, T. M. L., Mhenni, F., Choley, J.-Y., & Patalano, S. (2025). Digital twin-based framework for an efficient execution of CPPS reconfiguration through human–robot collaboration. Journal of Manufacturing Systems, 83, 157–174. https://doi.org/10.1016/j.jmsy.2025.09.001
Cimino, A., Elbasheer, M., Longo, F., Mirabelli, G., Solina, V., & Veltri, P. (2025). Automatic simulation models generation in industrial systems: A systematic literature review and outlook towards simulation technology in the Industry 5.0. Journal of Manufacturing Systems, 80, 859–882. https://doi.org/10.1016/j.jmsy.2025.03.027
da Silva, L. B. P., Pontes, J., Mosconi, E., Treinta, F. T., Yoshino, R. T., & de Resende, L. M. M. (2026). The future of HRM for intelligent manufacturing systems in the context of Industry 5.0. Computers & Industrial Engineering, 211, 111587. https://doi.org/10.1016/j.cie.2025.111587
De Marchi, M., Pomalo, M., Vallazza, R., Falcomatà, I., Aruväli, T., & Rauch, E. (2025). Enhancing IT/OT Cybersecurity Knowledge Transfer Through Demonstrative Workshops in Cyber-Physical Production Systems. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 2296–2305. https://doi.org/10.1016/j.procs.2025.01.290
Dhanda, M., Rogers, B. A., Hall, S., Dekoninck, E., & Dhokia, V. (2025). Reviewing human-robot collaboration in manufacturing: Opportunities and challenges in the context of Industry 5.0. Robotics and Computer-Integrated Manufacturing, 93, 102937. https://doi.org/10.1016/j.rcim.2024.102937
Dong, W., Li, D., Ji, Y., Chen, H., Liu, S., Ma, Z., Hao, F., Ji, Y., Xing, H., & Zheng, P. (2025). Towards a next-generation LLM empowered low-code programming industrial robotic system for human-centric smart manufacturing. Journal of Manufacturing Systems, 83, 675–686. https://doi.org/10.1016/j.jmsy.2025.10.012
Englund, T., Bruch, J., Chirumalla, K., & Ashjaei, M. (2025). Towards Holistic Cyber-Physical Production Systems in Existing Production Environment: Challenges from a Case Study. 58th CIRP Conference on Manufacturing Systems 2025, 134, 115–120. https://doi.org/10.1016/j.procir.2025.03.020
Gaffinet, B., Al Haj Ali, J., Naudet, Y., & Panetto, H. (2025). Human Digital Twins: A systematic literature review and concept disambiguation for Industry 5.0. Computers in Industry, 166, 104230. https://doi.org/10.1016/j.compind.2024.104230
Gaffinet, B., Naudet, Y., & Panetto, H. (2025). A Systemic Human Digital Twin Model for Human-centric Systems??This work was supported by the ANR French National Research Agency and the FNR Luxemburg National Research Fund, project AI4C2PS (INTER/ANR/22/17164924/AI4C2PS), 2023–2026. 11th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2025, 59(10), 416–421. https://doi.org/10.1016/j.ifacol.2025.09.072
Gao, Q., Liu, J., Liu, S., & Zhuang, C. (2025). From human-related to human-centric: A review of shop floor scheduling problem under Industry 5.0. Journal of Manufacturing Systems, 82, 531–546. https://doi.org/10.1016/j.jmsy.2025.07.003
Gholamizadeh, K., Zarei, E., Gualtieri, L., & Marchi, M. D. (2025). Advancing occupational and system safety in Industry 5.0: Effective HAZID, risk analysis frameworks, and human-AI interaction management. Safety Science, 184, 106770. https://doi.org/10.1016/j.ssci.2024.106770
Hamdani, R., & Chihi, I. (2025). Adaptive human-computer interaction for Industry 5.0: A novel concept, with comprehensive review and empirical validation. Computers in Industry, 168, 104268. https://doi.org/10.1016/j.compind.2025.104268
Hapsari, T. A. R., Rosyada, D., & Bariyah, N. O. N. (2025). Strategies for Improving Literacy and Numeracy in Computer-Based National Assessment at Madrasah Ibtidaiyah. Scientechno: Journal of Science and Technology, 4(1), 1–16. https://doi.org/10.70177/scientechno.v4i1.1954
Hassan, A. H., Ahmed, E. M., Hussien, J. M., Sulaiman, R. bin, Abdulhak, M., & Kahtan, H. (2025). A cyber physical sustainable smart city framework toward society 5.0: Explainable AI for enhanced SDGs monitoring. Research in Globalization, 10, 100275. https://doi.org/10.1016/j.resglo.2025.100275
Hazmi, M., Jiwon, S., & Kingh, R. (2025). Utilization of the Microbiome to Increase Food Security Throught Sustainable Biotechnology. Scientechno: Journal of Science and Technology, 4(1), 32–39. https://doi.org/10.70177/scientechno.v4i1.2116
Hofer, A., Aruväli, T., Rauch, E., & Matt, D. T. (2025). The Change from Shareholder Value to Stakeholder Value within Industry 5.0. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 2156–2165. https://doi.org/10.1016/j.procs.2025.01.276
Irianti, E., Anis, N., & Aziz, S. (2025). Pattern Recognition System for Automating Medical Diagnosis Based on Image Data. Scientechno: Journal of Science and Technology, 4(1), 40–47. https://doi.org/10.70177/scientechno.v4i1.2126
Kobusch, M., Gochermann, J., & Mpofu, K. (2025). Towards Sustainable Manufacturing: Divergent Approaches in smart product service systems by Machine Builders and Component Manufacturers. 35th CIRP Design 2025, 136, 314–318. https://doi.org/10.1016/j.procir.2025.08.055
Krokowski, T., Regelmann, C., & Wentzek, D. (2025). Industry 5.0 in Smart Manufacturing: The Need for Equilibrium in Work Organization. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 582–593. https://doi.org/10.1016/j.procs.2025.01.120
Li, M., Liu, F., Li, M., Zhou, Q., Ling, S., Qu, T., & He, Z. (2025). Operation twins-driven human-centric replenishment-kitting synchronization for smart customized production logistics. Advanced Engineering Informatics, 68, 103687. https://doi.org/10.1016/j.aei.2025.103687
Liu, S., Xie, J., Wang, X., & Qin, L. (2026). Toward human-centric coal mine auxiliary operations in Industry 5.0: An XR-based approach for human-robot hybrid decision-making. Advanced Engineering Informatics, 69, 103965. https://doi.org/10.1016/j.aei.2025.103965
Maia dos Santos, J. B., de Lima Ferreira, M., Pissardini, P. E., Vieira, R. F., de Paiva, C. S., Filho, M. G., de Arruda Xavier, L., Santos Neto, A. S., & Luiz Pissardini, N. C. (2025). New Capabilities-Enabled by Smart Industrial Products for Human-centric Production Planning and Control: State-of-the-Art and Research Agenda. 11th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2025, 59(10), 1736–1741. https://doi.org/10.1016/j.ifacol.2025.09.292
Mathias, P. M., Javier, M. S., & Felipe, M. L. R. (2025). Virtual worlds in AECO operations: Towards a human-centric framework. Automation in Construction, 180, 106529. https://doi.org/10.1016/j.autcon.2025.106529
Misra, S., Barik, K., & Kvalvik, P. (2025). A Comprehensive Review of Human-centric AI, Regulatory Frameworks, and Their Role in Shaping Industry 5.0. Sixth International Conference on Futuristic Trends in Networks and Computing Technologies (FTNCT06), Held in Uttarakhand, India, 259, 1672–1681. https://doi.org/10.1016/j.procs.2025.04.122
Muttillo, V., Eramo, R., Cederbladh, J., Strandberg, P. E., & Ashraf, A. (2026). Experiences and challenges from a software ecosystem for cyber–physical systems development: An empirical study on industry-academia collaboration. Journal of Systems and Software, 231, 112579. https://doi.org/10.1016/j.jss.2025.112579
Nissoul, S., Pacaux-Lemoine, M.-P., & Chaabane, S. (2025). Enhancing Human-Cyber-Physical System Cooperation: A Grid-Based Modeling Approach. 11th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2025, 59(10), 434–439. https://doi.org/10.1016/j.ifacol.2025.09.075
Nova, N., Januar, J., Rahmi, U., & Yusrawati, Y. (2025). The Importance of Personnel Planning and Infrastructure in Supporting Work Effectiveness at Ar-Rahman IT SMP Lareh Sago Halaban. Scientechno: Journal of Science and Technology, 4(1), 17–22. https://doi.org/10.70177/scientechno.v4i1.1816
Saldana, S. C., Kapoor, A., Acharya, S., & Markus, H. (2025). Energy Efficiency Analysis in Industry 4.0 set up leveraging Industry 5.0 methods for Sustainable Manufacturing: Case Study. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 594–602. https://doi.org/10.1016/j.procs.2025.01.121
Sappaile, B. I. (2024). The Impact of Gamification Learning on Student Motivation in Elementary School Learning. Scientechno: Journal of Science and Technology, 3(2), 1–13. https://doi.org/10.55849/scientechno.v3i2.1050
Shah, R., Doss, A. S. A., & Lakshmaiya, N. (2025). Advancements in AI-enhanced collaborative robotics: Towards safer, smarter, and human-centric industrial automation. Results in Engineering, 27, 105704. https://doi.org/10.1016/j.rineng.2025.105704
Singh, K. A., Patra, F., Ghosh, T., Mahnot, N. K., Dutta, H., & Duary, R. K. (2025). Advancing food systems with Industry 5.0: A systematic review of smart technologies, sustainability, and resource optimization. Sustainable Futures, 9, 100694. https://doi.org/10.1016/j.sftr.2025.100694
Terziyan, V., & Kaikova, O. (2025). Guardians of Reliability, Robustness, and Resilience: Adversarial Maintenance in the Era of Industry 4.0 and 5.0. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 13–24. https://doi.org/10.1016/j.procs.2025.01.065
Venanzi, R., Di Modica, G., Foschini, L., & Bellavista, P. (2026). Towards IT/OT integration in industry digitalization: A comprehensive survey. Journal of Network and Computer Applications, 245, 104373. https://doi.org/10.1016/j.jnca.2025.104373
Wang, M., Tong, Y., Zhuang, C., & Du, X. (2025). Towards Industry 5.0: A framework of reconfigurable matrix-structured manufacturing system. Journal of Manufacturing Systems, 82, 114–136. https://doi.org/10.1016/j.jmsy.2025.06.002
Wu, H., Li, M., Yu, C., Ouyang, Z., Lai, K., Zhao, Z., Pan, S., Wang, S., Zhong, R. Y., Kuo, Y.-H., Zhang, F., Huang, W., Shen, Z.-J. M., Ballot, E., & Huang, G. Q. (2025). Towards cyber-physical internet: A systematic review, fundamental model and future perspectives. Transportation Research Part E: Logistics and Transportation Review, 197, 104051. https://doi.org/10.1016/j.tre.2025.104051
Yan, J., Liu, Z., Leng, J., Zhao, J. L., Chen, C., Zhang, D., Tao, Y., Wang, Y., Liu, T., Zhang, C., Tong, Y., Mourtzis, D., & Wang, L. (2025). Human-centric artificial intelligence towards Industry 5.0: Retrospect and prospect. Journal of Industrial Information Integration, 47, 100903. https://doi.org/10.1016/j.jii.2025.100903
Yuan, G., Liu, X., Qiu, X., Zheng, P., Pham, D. T., & Su, M. (2025). Human-robot collaborative disassembly in Industry 5.0: A systematic literature review and future research agenda. Journal of Manufacturing Systems, 79, 199–216. https://doi.org/10.1016/j.jmsy.2025.01.009
Zare, L., Benedini, B., Ali, M. B., Rauch, E., & Salimbeni, S. (2025). Opportunities and Barriers for Implementing Human-centric Manufacturing in SMEs: Results from Focus Group Workshops in Argentina. 6th International Conference on Industry 4.0 and Smart Manufacturing, 253, 1452–1461. https://doi.org/10.1016/j.procs.2025.01.207
Authors
Copyright (c) 2026 Chai Pao, Zain Nizam, Rashid Rahman, Aiman Fariq
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
